 |
 |
| See Drawings | |
| See Graphs | |
| Voltage Controlled Crystal Oscillators |
|
||||||
| Dual in line VCXO's | |||||||
| V1 | V8 | V20 | V9 | V22 | ||||||
| FREQ' RANGE | 10.00 to 80.00 MHz |
1.00 to
200.00 MHz |
300.00
to 750.00 MHz |
|||||||
| FREQ'
STABILITY VS. TEMP' |
See "How - To - Order" instructions | |||||||||
| CALIBRATION AT 25°C & NOMINAL VC |
|
|
||||||||
| FREQ'
STABILITY VS. SUPPLY VARIATION (±5%) |
|
|
||||||||
| FREQ'
STABILITY VS. LOAD VARIATION (±10%) |
Typical: ±3 PPM |
|
||||||||
| AGING | ±2 PPM Max. first year |
±1 PPM
Max. per year |
||||||||
| OUTPUT WAVEFORM |
|
|||||||||
| HCMOS,
TTL, Clipped Sine Wave |
All options | All options except Sine Wave |
||||||||
| LOAD |
|
|||||||||
| SUPPLY VOLTAGE |
|
+3.3 Vdc ±5% |
||||||||
| SUPPLY CURRENT |
|
|||||||||
| FREQ'
DEVIATION RANGE |
See "How - To - Order" instructions | |||||||||
| NOMINAL
CONTROL VOLTAGE |
|
+1.65V | ||||||||
| CONTROL VOLTAGE RANGE |
|
0.3 to +3.0V | ||||||||
| LINEARITY | ±10% Max. Tighter linearity is possible | |||||||||
| SLOPE | Positive | |||||||||
| MODULATION FREQUENCY |
10 KHz (3 dB) | |||||||||
| INPUT IMPEDANCE |
50 KW Min. | |||||||||
| PACKAGE | DIP-14 4 pins 20.7 X 13.1 X 5.0 mm. |
|
DIP-14 |
DIP-14 5 pins 20.7 X 13.1 X 7.62 mm. |
||||||
| Environmental Conditions | ||||||||||
| SHOCK | ||||||||||
| IEC 68-2-27 (Test Ea) 30G, 18 mSec, Half Sine | ||||||||||
| VIBRATION | ||||||||||
| IEC 68-2-6 (Test Fc), 0.35mm, 5G, 10-2000Hz, 6 cycles/ axis | ||||||||||
| THERMAL SHOCK | ||||||||||
| IEC 68-2-14 (Test Na), 30 min. in each extreme temperature | ||||||||||
| SOLDERING HEAT | ||||||||||
| IEC 68-2-20A 230°C ±5°C for 10 Sec. | ||||||||||
|
||||||||||||||
|
||||||||||||||
|
||||||||||||||||
|
||||||||||||||||
|
|
|
